Flooring finishes must be optimized for hardness and flexibility.  All urethane aluminum oxide finishes have to put x amount of grams of aluminum oxide per square meter(10.764 square feet) of flooring.  Different finish manufacturers use different methods as well as some manufacturers develop more proprietary finishes with the assistance of the coating manufacturers.  When it comes to the practical points of a finish, keep in mind gloss levels and textured surfaces have much more to do with how a floor will look over time than the number of coats of finish.  The higher the gloss level, the more wear and tear will show.  A textured finish such as an open pore/brushed finish or a handscraped surface will show less wear.  The reality is that although aluminum oxide makes for a low maintenance and durable finish, it will still scratch.  Some finishes are better formulated and refined than others, but this has no relationship to the number of coats.

Don’t be fooled and fall for this misleading and uninformed information.

With today’s highly advanced coating technology used in wood flooring stains and finishes, caring for your wood floors has never been easier. Regular maintenance requires little more than sweeping with a soft bristle broom, and vacuuming with a soft floor attachment. You also should clean your floors periodically with a professional wood floor cleaning product such as Bona or Loba floor care. There are other acceptable cleaners, just make sure if you have a polyurethane aluminum oxide finished floor, you use a cleaner which is approved for this finish.
Preventive Maintenance

The following are additional steps which should be put into your routine maintenance plan and to extend the life of your beautiful wood floors.

1. Do not use sheet vinyl or tile floor care products on wood floors. Self-polishing acrylic waxes cause wood to become slippery and appear dull quickly.
2. Walk off areas are essential. Use throw rugs both inside and outside doorways to help prevent grit, dirt and other debris from being tracked onto your wood floors. This will help prevent scratching.
3. Do not wet-mop a wood floor. Standing water can dull the finish, damage the wood and leave a discoloring residue.
4. Wipe up spills immediately with a slightly dampened towel.
5. Put soft plastic or fabric-faced glides under the legs of furniture to prevent scuffing and scratching.
6. Avoid walking on your wood floors with cleats, sports shoes and high heels. A 125-pound woman walking in high heels has an impact of 2,000 pounds per square inch. An exposed heel nail can exert up to 8,000 pounds per square inch. This kind of impact can dent any floor surface.
7. When moving heavy furniture, do not slide it on wood flooring. It is best to pick up the furniture completely to protect the wood flooring.
8. For wood flooring in the kitchen, place an area rug in front of the kitchen sink. This is a high traffic spot.
9. Use a humidifier throughout the winter months to keep wood movement and shrinkage to a minimum. Maintaining relative humidity throughout the year to 35-55% is recommended as excessively low or high relative humidity can have negative consequences.

High Gloss Brazilian Walnut Flooring - Shows light reflectivity

If you’ve been shopping for a new wood floor lately, I bet you have heard about wood flooring gloss or sheen levels.  Let me help you understand this concept better.  Gloss is an optical term that describes the ability of a surface to reflect light.  The higher the gloss level, the more it directly reflects light.  The lower the gloss level, the surface absorbs and diffuses the light sources.  This is normally measured at a 60 degree angle which is equivalent to looking at the surface while standing up.

As a homeowner or commercial property manager it is key to understand what this means.  The higher a gloss level, the more wear and tear will show.  Think of a piano finish(high gloss)…..it shows everything!  The lower gloss level shows less wear and tear and depending on the gloss level will actually bring out more of the naturalness of your wood floor.  It seems crazy that we buy wood floors because they are a natural product and than we put a plastic derived finish on top of them which takes away from this natural surface.  The great news is that there are many options on the market to consider what is the right choice for you.

Higher Gloss level showing light reflectivity

Atelier by stewartfloor with matte gloss level - Brazilian Teak Flooring

The matte finish of the surface of stewartfloor atelier products accentuates the original and natural character of these fine species. Atelier combines all the advantages of the “standard” aluminum oxide finished flooring with the visual expression of an old world oil finish without the maintenance.

Atelier provides the visual interest of a slightly brushed texture due to its open pore finish which allows the floor to radiate the vitality of an old world oil finish and the additional benefit of showing less wear over time. Atelier combines all the advantages of a highly resistant, easy care aluminum oxide finish with the unmatched visual depth of a natural matte oil surface finish. Another major advantage is very little light reflectivity which also brings out the natural grain better than other finishes.

This collection embodies our work over the last 13 years specializing in tropical wood from South America. It is our sincere belief that these species are truly unique and special, atelier is the embodiment of our pursuit of passion and to offer the perfect floor.

Our customer Mr. Christoffersen of Carol Stream, IL said it best, when he commented on his stewartfloor atelier 3/4″ x 3-1/4″ Brazilian Teak/Cumaru flooring, “Let me just say-WE LOVE IT! When you said it was clear/premium grade, how true, and the finish is perfect. Even the installers said they had no issues whatsoever.”

Please call or have your designer, architect or builder contact stewartfloor today at 866-780-7839 ext. 5. Discover stewartfloor atelier collection for yourself, you’ll agree it’s classically Modern wood flooring.

Stewartfloor Atelier Brazilian Teak Flooring Cumaru Flooring

Gorgeous & Unique Interlocked Sucupira Grain Pattern

Stewartfloor is excited to once again offer Tiete Chestnut/ Sucupira Prefinished solid wood flooring.  We are offering this exceptionally elegant choice in 3/4″ x 3-1/4″ width with lengths of 1′ to 7′.  As with everything we sell, we directly import this product from one of our longtime suppliers.  No middlemen and no tax!  Call us today.

Brazilian Teak/Cumaru going into the sander. The first step of prefinishing.

Yours Truly, Sean Stewart inspecting and "racking out" prefinished hardwood from the finish line.

Find us here too:  www.stewartfloor.com/facebook and www.stewartfloor.com/linkedin